Loading...

, Independent Distributor

  • MBL Grease Superior Lubricant (450g)

    MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base.

    $25.30

    Product code: 50125 Points: 1

    Delivery to UK calculated in cart

    Product Information

    MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base. It is extremely resistant to water wash-out and has an operating range from -40°C to +280°C.

    MBL Grease may be used for universal joints, suspension and steering joints, wheel bearings, electric motor bearings, hoist and conveyor bearings, axles and bushes, winches and gear boxes (where grease is specified).

    There are many operators who would normally grease their machinery on a daily basis. They are now lubricating that same machinery every third or in some cases, every fourth day. To get the full benefit from MBL Grease use it sparingly. It has a tremendous operating range, working down below freezing and up to very high temperatures with exceptional results.

    MBL Grease is being used in the commercial, industrial, earthmoving and marine fields with success, under many diverse conditions. It is extremely good where water contact is likely.

    The micro-metallic particles dispersed throughout the MBL Grease are spherical in shape and act as millions of tiny ball bearings between two surfaces, greatly reducing friction. Under high pressure application, these spherical micro-metallic particles are deformed and flattened to fill up any pits, scores or irregularities which occur in the surfaces to be lubricated. The unique properties of the micro-metallic particles provide lubrication, film strength and heat dissipation.

    MBL Grease has a Lithium Complex base. It features an operating range of -40°C (-40°F) to an incredible 280°+C (500°+F). Most current Lithium base greases have a maximum operating temperature of 120°C (250°F), while some new Lithium Complex greases have maximums of 180°C (360°F) in a mineral oil and 230°C (430°F) in a synthetic oil. The maximum continuous operating temperature of MBL Grease is 205°C (400°F).

    The extreme conditions under which MBL Grease now efficiently lubricates, range from deep freeze operation to disc brake temperatures. MBL Grease has superior oxidation stability, improved water resistance, rust and corrosion protection, high load carrying capability and nylon bearing cage compatibility.

    Some grease bases may not be compatible with a Lithium Complex Grease, e.g., clay or Bentonite Grease. If possible, ensure that all previous grease is cleaned from the components to be greased and from the grease gun before using MBL Grease. This will ensure that you receive the maximum benefit from this exceptional grease.

    When greasing bearings, particularly high speed bearings, it is important not to fill the air space more than one quarter to one third full of grease to allow expansion and to allow the grease to move with the bearings for proper lubrication.

    Pro-Ma Performance Products MBL Grease represents the latest in lubrication technology reinforcing Pro-Ma Systems constant commitment to providing quality products to serve the interests of our Distributors and the retail customers.

    Composition

    The Lithium Complex soap structure with a micro metallic base lubricity matrix provides good high-temperature performance characteristics. In many conventional greases, load carrying additives normally limit high temperature performance but MBL Grease retains this feature whilst continuing to provide extreme pressure protection. MBL Grease provides dependable lubrication at low temperatures. Low temperature torque tests conducted at -40°C (-40°F) show MBL Grease to be suitable for use at temperatures at or above this level. The ability to retain a relatively soft consistency at low temperatures means that cold weather dispensing problems are minimised. MBL Grease has extreme pressure and anti wear characteristics that enable it to serve under conditions of high loading or severe shock loading.

    Benefits of Use

    • Performs within high and low temperature operating ranges
    • Resists water and water washout
    • Provides oxidation stability
    • Protects against rust
    • Protects against extreme pressure
    • Works well with high loading or severe shock loading
    • Extends lubrication periods
    • Prevents excessive seal swelling

    Specifications

    The Base Grease Used in MBL Grease has the Following Specifications:

    NLGI Grade................................................................. 2
    Soap Type.................................................................. Lithium-complex
    Texture....................................................................... Buttery

    Base oil viscosity
    cSt at 40°C................................................................ 148
    cSt at 100°C.............................................................. 14
    SUS at 100°F............................................................. 767
    SUS at 210°F............................................................. 75
    Base oil viscosity index............................................... 90
    Dropping point C (F) (ASTM D 2265)............................. 280°+C (500°+F)

    Penetration, mm/10 (ASTM D 217)
    Unworked.................................................................. 280
    Worked 60 Strokes.................................................... 285
    Worked 100,000 strokes, % change.......................... .+10

    Trident probe viscosity (ASTM D 3232)
    204°C (400°F), poises................................................ 15

    Oil Separation (ASTM D 1742)
    24 hr at 25°C (77°F), %.............................................. 3

    Lubrication life (ASTM D 3336), no. 204 bearing
    10,000 rpm, 163°C (325°F), hrs................................. 290

    Oxidation stability (ASTM D 942)
    Pressure drop at 100 hr, kPa (psi).............................. 14(2)
    Pressure drop at 500hr, kPa (psi................................ 70 (10)
    Roll stability (ASTM D 1831) % penetration change.. +10

    Wheel bearing test (ASTM D 1263 modified: 60-9 pack 160°C (325°F)
    Leakage, g.................................................................. .1.5

    Load carrying properties:
    Timken load (ASTM D 2509,kg (lb)............................... 25 (55)

    4-Ball EP test (ASTM D 2596)
    Load wear Index, kg.................................................... 40
    Weld point, kg............................................................ 250

    4-Ball wear test (ASTM D 2266), 40kg, 1200rpm,
    75°C (167°F), 1 hr. Wear scar diameter, mm............. 0.40

    Ball-joint test (ASTM D 3428)
    Brine sensitivity (noise and wear)............................. Pass
    Torque stability.......................................................... Pass
    Water washout (ASTM D 1264), % at 80°C (175°F)... 4
    Rust prevention (ASTM D 1743), ASTM rating........... 1

    Low temperature torque (ASTM D 1478), -40°C (-40°F)
    Starting, g-cm............................................................ 13,000
    Running, g-cm........................................................... 5,000

    Mobility (U.S. Steel method)
    Flow rate at -18°C (0°F), g/sec.................................. 0.5

    Rubber swell (GM method) 70hr at 100°C (210°F)
    Volume change, %..................................................... +12

    Handling

    Product contains petroleum oil, copper and lead particles, Do NOT store near heat, sparks or flame. Wash with soap and water after contact with skin. KEEP OUT OF REACH OF CHILDREN. A Material Safety Sheet is available from Pro-Ma Systems.

    Warning

    Do NOT take internally. Harmful or fatal if swallowed. Contains copper and lead particles and hydrocarbons. If swallowed contact a doctor immediately. Wash hands after use.

    Medical Advice: Contains petroleum oil, copper and lead particles. If swallowed, do NOT induce vomiting. Call physician immediately.

    Sizes Available

    450g, 2.5kg, 20kg, 60kg, and 202.5kg.

    Customer reviews...

    the best
    joseph akl

    I am a distributor so am a bit biased but I have a customer who says this is the only grease he has found that can handle wet grass so awesome in his commercial lawn mowers.
    Michael Wilkinson Auckland

    The ability of of this product to keep performing after visible signs of lubrication is amazing. Obviously things won't run for ever without replenishment but for instance I put a light smear on my trailer shackle once a year or less often. You can't see any trace of it after about 3 months in winter but I can still undo and do it up tight with no more than my fingers after 12-18 months, where I used to always have to go out with the pliers! I use it everywhere grease is appropriate but only a 3rd as much as I used to of "cheaper" greases and it lasts so much longer, so capital cost is higher but better performance and longer lasting, so guess what? Long term cheaper to use!
    Trevor Willmot New Zealand

    I will always endorse this grease , when I was working for Dept of Primary Industries , in charge of a Boating and Fisheries Patrol station which involved launching and retrieving boat trailers day in and day out which involved the total emersion of the wheel bearings and the only grease we every used was MBL and not once did we have a trailer break down and when the time came to regrease, my wheel bearing guy was always amazed by the superb condition of the wheel bearings which was totally a result of the use of this grease. Now that I am retired I still use it for all my trailers and caravan.
    Tom McNamara Darling Downs , Queensland

    Submit your own review for this product

    *Provided a minimum of 15 personal qualifying points is achieved in the current month: Sales Assosiates and Sales Managers will qualify for a further discount of 5% of the B.V. value. Sales Executives will qualify for a further discount of 10% of the B.V. value. Directors will qualify for a further discount of 15% of the B.V. value. Director has the potential to earn a further 5% discount of the B.V. value on personal orders, which will be rebated at month end, provided the Director places orders during the month with a combined Customer Retail value of AU$1,000.00 or more. We review and update our product packaging in order to ensure it remains as sustainable as possible. The packaging of your product may therefore vary.

    Australian owned and family operated

    Proudly Australian owned & family operated since 1983

    Pro-Ma Systems is proud to be a full member of the Direct Selling Association of Australia and is committed to the DSAA Code of Practice. The DSAA is an association of companies who sell products directly to consumers. It supports fair and proper trading practices and is dedicated to defending and promoting the independent status of Distributors within the industry.